Patent Pending

All Metal & Reusable
Only @ $179.00

Are you a professional contractor who is working in the HVAC, insulation, home performance or building industry? Have you been looking for a spray system that applies polyurethane foam sealant in a way that allows you to fix and seal quickly? The Spray Sealants Gun allows the professional to spray foam sealants using either 24oz cans or 10 & 16lb canisters. 

The Spray Sealants Gun Adapter allows both the Spray Sealants Gun and the Foam Sealants Gun to draw one component foam out of 10lb or 16lb Canisters which greatly increases your productivity on your next fix and seal project. The adapters are very durable, easy to clean and simple to put together. Also, because of their unique design, they will not leak once they are hand tightened onto the gun. 

The Three-In-One Gun

The patent pending Spray Sealants Gun Adapter is specifically designed to accommodate the Spray Sealants Gun so that when it fits onto the basket, it will not leak. This adapter gives the operator the flexibility to spray or to use a manual gun to apply a bead application out of a 10lb or 16lb canister. Also, because the adapter was designed for simplicity, it is easy to use and will fit onto the basket of any manual foam sealant gun in the market. 

  • Easy to Use
  • Class 1 Fire Retardant Provides a Permanent Seal Against Air, Moisture and Insect Infiltration
  • Easier to Use Than Caulk Type Penetration Sealants
  • Bonds to Common Building Materials Including Wood, Concrete, Insulating Foam Boards, Metal, Plastics and Sheetrock
  • Available In Both Straw and Cylinder Dispensing Systems
  • Reduces Energy Loss
  • No Ozone Depleting Chemicals
  • Does Not Shrink
  • Does Not Trap Moisture, Dust and Allergens As Does Fiberglass Insulation
  • Expands to Fill Gaps and Cracks, Reducing Air Exchanges
  • Reduces Use Of Fossil Fuels and Improves Air Quality
  • Helps to Reduce Greenhouse Gas Emissions
  • Closed Cell Structure
  • 24,400 Linear Feet at 1/4" Bead

16lb Canisters

Insulating foam sealants are a type of spray polyurethane foam (one component foam) that has insulating, air sealing, and adhesive properties. Insulating foam sealants are available at home improvement stores and come in small cans (typically 12-24 oz.) or canisters ( 10lb-16lb). These products are intended for application for air sealing or as an adhesive. Their small volume, ease of use, and portability make them well-suited for smaller projects tackled by the Do-It-Yourselfer. They are typically dispensed using a straw or small dispensing gun. These “canned” foam products have specific safety information on the label that should be carefully followed.